Honda SXS700M4 Service Manual page 475

Do
not
use
high
pressure air
or
bnng
the Mule too close
/0
the
inlet.
Be careful nolto
damage the pis/on
sliding surface.
Place a shop towel over the piston.
Position the caliper body with the piston down and
apply small squirts of air pressure to the fluid inlet to
remove the piston.
Remove the piston boot [1].
Push the piston seal [11 in and lift it out.
Clean the
boot
and seal grooves, caliper cylinder, and
piston
with
clean brake fluid .
INSPECTION
Check the caliper cylinder and piston for scoring,
scratches or damage.
BRAKE SYSTEM
20·17