Honda SXS700M4 Service Manual page 183

Install the oil pipe A [1) and oil pipe B [2] into the oil
cooler and connect them into the engine in shown
direction.
Install the four joint bolts [3) and tighten them securely.
Install the wire stay [1) while aligning its edge with the
oil cooler lug as shown , then install and tighten the bolt
[2] securely.
Fill the engine with the recommended oil (page 3-10).
Fill and bleed the cooling system (page 9-5).
Check the engine oil level (page 3-9) .
DISASSEMBLY/ASSEMBLY
Remove the following:
- five bolts [1j
- cooler cover [2]
- D-ring [1)
Replace the O-ring with a new one .
LUBRICATION SYSTEM
@
/
8-11