Honda SXS700M4 Service Manual page 236

ALTERNATOR/STARTER CLUTCH
The cover (stator) ;s
magnetically
attracted to the
flywheel. be careful
dunng
removal.
12-6
- ten bolts (1], four sealing washers (2) and clip stay
[3J
- alternator cover [4]
- dowel pins [1]
- gasket [2]
- starter torque limiter 111
- reduction gear (2)
- gear shaft [3]
INSPECTION
Check the bearings [11 in the alternator and rear
crankcase covers.
Turn the inner race of each bearing with your finger.
The bearing should turn smoothly and quietly.
Also check that the outer race of the bearing fits lightly
in the covers.
Torque limiter bearings replacement (page 12-8)