Honda SXS700M4 Service Manual page 269

CRANKCASE/CRANKSHAFT/BALANCER
INSPECTION
Set the crankshaft in a sland or V-blocks and measure
r---
the runout using a dial indicator.
I
SERVI CE LIMIT: 0.15 mm (0.006 in)
Measure the side clearance between the connecting
rod
big
end and crank weight with a feeler gauge .
SERVICE LIMIT: 0.8 mm (0.03 in)
Measure the radial clearance al the connecting rod big
end in an X and Y directions.
SERVICE LIMIT:
0.05 rnm
(O.002 In)
Check the balancer gear for wear or damage.
14·7