Honda SXS700M4 Service Manual page 281

ENGINE REMOVAUINSTALLATION
Remove the bolt {1] and ground cable [2[.
Disconnect the alternatorfCKP sensor 5P (black)
::;~;:;;;;;;;;;;;;;;;;;;;":==;;:~:~~~
connector (1[ and gear position switch 3P (black)
connector [2[.
Remove the bolt [3] and parking brake cable clamp [4).
Release the three harness clips
11]
from the frame.
Secure the main wire harness [2) to the right side of the
vehicle with a string to prevent interference when
removing the engine.
Loosen the front final gear case front mounting nut [1J .
Remove the following:
- front final gear case upper mounting nut(2J and bolt
131
- two front final gear case mounting bracket bolts (4J
15-5