LUBRICATION SYSTEM
PUMP BOOYD
Coat new O-rings [11 with engine oil and install them
onto the joint pipes on the oil pump [2J
.
Place the
driven sprocket [31 on the oil pump onto
the
oil pump drive chain [4J. and install
the
pump onto the
crankcase by aligning the joint pipes with the jOint holes
properly.
Install the three mounting boits (1) and tighten them. If
the pump was disassembled, lighten all the bolts [1]1[2]
in a crisscross pattern in several steps.
Install the torque converter (page 16-42).
OISASSEMBL Y
Disassemble the oil pump according to the
illustration.
RELIEF VALVE
C-RING
INNER ROTORS
PUMP BODY B
ASSEMBl
Y BOLTS
PUMP BODY C
OUTER ROTORS
8-6
DRIVEN SPROCKET
.,p~
/
~
t7T BOLT
PUMP BOOYA