Honda SXS700M4 Service Manual page 217

Install the rocker arms [1]. wave washers [2] (setting
bolt side) and arm shafts [3J.
Align the bolt holes in the head cover and rocker arm
shaft [1] by turning the shaft.
Install the setting bolts [2] wi th new sealing washers [3]
and lighten the bolts securely .
INSTALLATION
Turn the crankshaft and align the
"r
mark [1] with the
index mark (2). then check the cam lobes through the
cam follower holes.
If the cam lobes face up. rolate the crankshaft one full
turn and match up the
"r
mark again so the cam lobes
face down.
Coat the cam followers [1] with engine oil and install
them into the cylinder head.
CYLINDER HEADNALVE/CAMSHAFT
.
[3[
[1 [
[2[
10-19