Honda SXS700M4 Service Manual page 377

- adjusting nut [1)
- cable retaining plate [2]
- selector cable (3) (remove from the cable holder (4)
and joint pin [51)
- cable spring [6]
- jOint pin
- base bolts [1 ]
- arm cover base [2)
- holder bracket 13]
DRIVE SHAFT/FINAL GEAR
( 3 1 - -..... ''"''
{61
Loosen the two bracket bolts (10 mm) [1] and remove
lii~;~; !~~:-~:::~II!I~
the lower mounting nut [2] and bolt (12 mm) [3].
I
Remove the bracket bolls and mounting bracket [4].
Support the gear case [5J with wooden blocks and
remove the upper mounting nut [6) and bolt (12 mm) [7).
18-15