Honda SXS700M4 Service Manual page 391

DRIVE SHAFT/FINAL GEAR
Install the lock sleeve 11] and half shaft (2] in the
direction as shown .
1 $1 •
..u;;..
Coat a new O-ring (3] with grease and install it into the
case groove.
Inslall the two dowel pins [4).
Install the differenliallock dutch housing [1) by aligning , - - -
the lork claws [2] with the sleeve groove [3).
Install the four bolts [4] with the cable holder {5] and
tigh ten them.
TORQUE : 25 N' m (2.5 kgf' m , 181bHt)
13J
J2J
11
J
ISJ
18·29