Honda SXS700M4 Service Manual page 383

Be careful not 10
damage/he oil
seal
lips.
Drive a new bearing 11) into the housing .
TOOLS :
Driver [2]
Attachment, 52 x 55 mm [3]
Pilot, 32 mm (4]
07749-0010000
07146-0010400
07MAD·PR90200
DRIVE SHAFT/FINAL GEAR
121
g 111-
Install the snap ring [1] into the housing groove securely
,--===~~~~~=~~~~-===~
with the chamfered edge facing the bearing.
Pack the seal lips of a new oil seal [2] with grease.
Instali l he oil seal so it is flush with the housing end.
Hold the bearing inner race and press the pinion joint
~~~~~~~cf~~~~~
....
- -.::i
(1) into the bearing unt il it is fully seated.
TOOLS :
Fork seal driver body [2]
Driver attachment,
33 mm
1.0. [3]
Oriver attachment
07747-0010100
07747'()010501
.,
07HMD·MR70100
Install the snap ring [1] into the pinion joint [2] groove
securely With the chamfered edge faCing the bearing .
18-21