Honda SXS700M4 Service Manual page 473

If Ihe rod joint [1J of push rod [2J is reinstalled, lighten
Ihe joint to the specified torque.
TORQUE: 17.2 N'm (1 .8 kgf' m , 13 1bHt)
BRAKE SYSTEM
Apply 0.1 9 of silicone grease 10 the boot groove
In
the
;:===============:---:;
push rod [1]. Install the
boot
[2] into the boot groov8.
Apply 0.1 9 of silicone grease to the boot groove in the
master cylinder body and to the push rod end.
Install Ihe push rod/boot assembly into the piston and
boot groove in the master cylinder.
Install new oil seals [1] onto the reservoir [2J.
InSlali the reservoir into the master cylinder and secure
it
with the bolt 131.
TORQUE : 2.5 N'm (0.3 kgf'm, 1.8Ibf·ft)
20-15