Ricoh Toscana-P1 J007 Service Manual page 71

3. Replacement and Adjustment
3
• Attach the new NVRAM so the curvature of the white line on the board [1] matches the curvature
of the indentation [2] on the NVRAM chip.
3. Install the new control board in the printer.
The table below lists the counters and other items that are cleared as a result of replacing the controller
board and NVRAM or replacing only the NVRAM. Some items require manual resetting, and others do
not require resetting.
In the table below:
Case 1: Control Board and New NVRAM.
Case 2: New Control Board only (with old NVRAM reattached).
Item
User Menu
- Paper Size
- System Setting
- I/F Setting
Bit Switches
70
Cas Cas Related SP, UP
e 1 e 2 Settings
All User Menu
YES NO
Items
YES NO ---
Reset Procedure
Print a System Sum-
mary. Confer with
the operator to de-
termine how to do
the settings.
Print a Service Sum-
mary. Refer to the
Bit SW 1 to 8
printed Service
Summary and reset.
Comment