Ricoh Toscana-P1 J007 Service Manual page 149

5. Service Tables
in the MID area of the paper in use during printing in the High Speed (Draft) mode is clogging
the print head nozzles. This SP setting is linked to the charge pitch tables (SP1200 to SP1231).
The IDs are determined by the temperature and humidity. There are 4 IDs associated with the
SP numbers listed below:
• SP1101: ID1
• SP1103: ID2
• SP1105: ID3
• SP1107: ID4
[0 to 255/0/1/0.1 mm]
Charge Width Setting Mj2: Simplex
5
1108 CHG:W1:EDGE:5
1110 CHG:W1:EDGE:6
1112 CHG:W1:EDGE:7
1114 CHG:W1:EDGE:8
Use this SP to set the pitch width of the charge applied to the LE/TE of any paper in any print
mode except: normal paper in High Speed (Draft) mode and glossy paper in High Quality
Mode.
Do this SP when mist build-up up near the leading and trailing edges of the sheets is clogging
the print head nozzles during printing with any paper in any mode, except normal paper in
High Speed (Draft) mode and glossy paper in High Quality mode. This SP setting is linked to
the charge pitch tables (SP1200 to SP1231). The IDs are determined by the temperature and
humidity. There are 4 IDs associated with the SP numbers listed below:
• SP1108: ID1
• SP1110: ID2
• SP1112: ID3
• SP1114: ID4
[0 to 255/0/1/0.1 mm]
1109 CHG:W1:MID:5
1111 CHG:W1:MID:6
1113 CHG:W1:MID:7
1115 CHG:W1:MID:8
148
LE/TE: Mj2: ID1
LE/TE: Mj2: ID2
LE/TE: Mj2: ID3
LE/TE: Mj2: ID4
MID: Mj2: ID1
MID: Mj2: ID2
MID: Mj2: ID3
MID: Mj2: ID4