Ricoh Toscana-P1 J007 Service Manual page 169

5. Service Tables
Maintenance, Replacement
5007 WASHING
Executes the automatic flushing procedure.
5100 PURGE:MAINTE
Moves the carriage in order to access the right air vent for cleaning.
5101 CARRIAGE CHANGE
Use this SP to reset the print head rank setting after print head replacement and to re-initialize
the initial filling counter.
Carriage Replacement Flow
1. Enter the print head rank (wave) of
5
• Print head 1.
• Print head 2.
• Print head 3.
• Print head 4.
2. Enter the print head rank (voltage) of
• Print head 1.
• Print head 2.
• Print head 3.
• Print head 4.
Initial Fill Counter Reset
1. Turn the printer off.
2. After executing this menu, turn the printer on to start initial filling of the print head tanks.
3. After executing this menu, the carriage adjustment mode can be executed.
5102 CARRIAGE ADJUST
Use this SP to adjust the print head gap after print head replacement and print the Nozzle Check
pattern.
Carriage Adjustment Mode Flow
Before executing this menu, you must execute the carriage replacement mode.
1. Print the print head gap adjustment chart (High Speed).
2. Adjust the gap (High Speed).
3. Print the print head gap adjustment chart (High Speed).
168
Execute Auto Washing
Purge Maintenance: Right Vent
Set Printer in Carriage Replace Mode
Set Printer n Carriage Adjust Mode