Ricoh Toscana-P1 J007 Service Manual page 189

5. Service Tables
Bit Meaning
1 Drive Cleaning Control
2 Reserved
Ink Supply Pump Long
3
Term Unused
4 Not Used
5 Not Used
6 Not Used
5
7 Not Used
Bit SW 1 is used to perform drive cleaning. Drive cleaning should be performed by the service technician
after head cleaning and head flushing (done with either the operation panel or the printer driver) fail to
clean the print heads successfully. For more detailed instructions about how to do this, please refer to "Drive
Cleaning" at the end of "Image Correction" in Section "4. Troubleshooting".
Bit SW 2. Not used. Do not change these settings.
Bit SW 3 Emulation
Bit
0 Not Used
1 Not Used
2 PCL5e/5c
3 Not Used
4 Not Used
5 Not Used
6 Not Used
188
Setting
0
OFF ON
OFF ON
Setting
Function
0
OFF
Default
1
After setting to "1" returns to "0" imme-
0
diately after drive cleaning is finished.
Do not change this setting.
1
Default
1
Makes the printer compatible with
ON 0 old HP PCL printer drivers (HP4000,
HP8000, etc.)
Details
Details