Ricoh Toscana-P1 J007 Service Manual page 137

4. Troubleshooting
Table 3-19 Mj4 Charge Pitch Table
Printing on Transparencies (OHP)
4
Table 3-20 OHP Charge Pitch Table
The functions to adjust each table are in SP1100 to SP1163 (Engine Maintenance Mode). The settings
are stored in NVRAM on the main control board after they adjusted and remain in effect after the machine
is cycled off/on.
Table 3-21 Mj1 Charge Pitch Table Service Menu
Units: mm, Factory Defaults: All "0"
SP No.
1100 CHG:W1:EDGE:1
1101 CHG:W1:MIDL:1
1102 CHG:W1:EDGE:2
1103 CHG:W1:MIDL:2
1104 CHG:W1:EDGE:3
1105 CHG:W1:MIDL:3
1106 CHG:W1:EDGE:4
1107 CHG:W1:MIDL:4
1108 CHG:W1:EDGE:5
1109 CHG:W1:MIDL:5
136
**T933
Menu Title
Charge Width Setting: Simplex (LE/TE: Mj1: ID1)
Charge Width Setting: Simplex (MID: Mj1: ID1)
Charge Width Setting: Simplex (LE/TE: Mj1: ID2)
Charge Width Setting: Simplex (MID: Mj1: ID2)
Charge Width Setting: Simplex (LE/TE: Mj1: ID3)
Charge Width Setting: Simplex (MID: Mj1: ID3)
Charge Width Setting: Simplex (LE/TE: Mj1: ID4)
Charge Width Setting: Simplex (MID: Mj1: ID4)
Charge Width Setting: Simplex (LE/TE: Mj2: ID1)
Charge Width Setting: Simplex (MID: Mj2: ID1)
Meaning