Ricoh Toscana-P1 J007 Service Manual page 157

5. Service Tables
Use this SP to calibrate the temperature readings for duplex printing. Do this SP to update the
charge pitch table for duplex printing. This SP setting is linked to the temperature steps in the
charge pitch tables (SP1200 to SP1231).
[-128 to +127/0/1/0.1%]
Charge ID Tables: Mj1
1200 CHG:PITCH:A1
1201 CHG:PITCH:A2
1202 CHG:PITCH:A3
1203 CHG:PITCH:A4
5
1204 CHG:PITCH:A5
1205 CHG:PITCH:A6
1206 CHG:PITCH:A7
1207 CHG:PITCH:A8
Use this SP to configure the charge ID table for printing on normal paper in High Speed (Draft)
mode. Do this SP when mist build-up on the paper in use is clogging the print head nozzles.
This setting is linked to the charge pitch settings (SP1100 to 1107, SP1133 to 1139).
[0 to 0xffff ffff/0/1/---]
For more details, please refer to Section 4 "Transport Belt Charge Adjustments".
Charge ID Tables: Mj2
1208 CHG:PITCH:B1
1209 CHG:PITCH:B2
1210 CHG:PITCH:B3
1211 CHG:PITCH:B4
1212 CHG:PITCH:B5
1213 CHG:PITCH:B6
156
Mj1: Less Than 10% Lookup Table
Mj1: 10% → 25% Lookup Table
Mj1: 25% → 35% Lookup Table
Mj1: 35% → 45% Lookup Table
Mj1: 45% → 55% Lookup Table
Mj1: 55% → 65% Lookup Table
Mj1: 65% → 75% Lookup Table
Mj1: More than 75% Lookup Table
Mj2: Less Than 10% Lookup Table
Mj2: 10% → 25% Lookup Table
Mj2: 25% → 35% Lookup Table
Mj2: 35% → 45% Lookup Table
Mj2: 45% → 55% Lookup Table
Mj2: 55% → 65% Lookup Table