Ricoh Toscana-P1 J007 Service Manual page 151

5. Service Tables
1119 CHG:W1:MID:10
1121 CHG:W1:MID:11
1123 CHG:W1:MID:12
This SP code is currently under development.
Use this SP to set the pitch width of the charge applied to the MID area of paper in future print
modes except: normal paper in High Speed (Draft) mode and glossy paper in High Quality
Mode. Do this SP when the paper is use is causing mist to build up in the MID area and clogging
the print head nozzles. This SP setting is linked to the charge pitch tables (SP1200 to SP1231).
The IDs are determined by the temperature and humidity. There are 4 IDs associated with the
SP numbers listed below:
• SP1117: ID1
5
• SP1119: ID2
• SP1121: ID3
• SP1123: ID4
[0 to 255/0/1/0.1 mm]
Charge Width Setting Mj4: Simplex
1124 CHG:W1:EDGE:13
1126 CHG:W1:EDGE:14
1128 CHG:W1:EDGE:15
1130 CHG:W1:EDGE:16
Use this SP to set the pitch width of the charge applied to the LE/TE of glossy paper for printing
in the High Quality mode. Do this SP when the mist build-up near the leading and trailing edges
of glossy paper is causing the print heads to clog during printing in High Quality mode.
This SP setting is linked to the charge pitch tables (SP1200 to SP1231). The IDs are determined
by the temperature and humidity. There are 4 IDs associated with the SP numbers listed below:
• SP1124: ID1
• SP1126: ID2
• SP1128: ID3
• SP1130: ID4
[0 to 255/0/1/0.1 mm]
150
MID: Mj3: ID2
MID: Mj3: ID3
MID: Mj3: ID4
LE/TE: Mj4: ID1
LE/TE: Mj4: ID2
LE/TE: Mj4: ID3
LE/TE: Mj4: ID4