Ricoh Toscana-P1 J007 Service Manual page 191

5. Service Tables
Bit
Humidity Sensor Check
0
5
Self-Diagnostics Execute
1
2 Double-Count
3 Carriage Setting 2
Charge Setting
4
ICB Miscount Recovery
5
USB Serial Signal
6
190
Setting
Function
0
OFF
OFF
OFF
OFF
OFF
OFF
0
Default
1
ON 1 This switch determines whether the
humidity sensor is checked after
power on and before the ink tanks
are filled.
OFF: Check is not done.
ON: Check is done
If an abnormal condition is detec-
ted, this triggers SC986 and the
printer will not operate (the tanks are
not filled).
ON 0 This switch sets whether the self-di-
agnostic test executes automatically
if the humidity sensor connection is
broken.
OFF: No self-diagnostics
ON: Self-diagnostics execute
ON 0 Not used for J007/J010, J011
ON 0 Not used for J007/J010, J011
ON 0 Shows the flag to indicate updated
version allows charge adjustment
on the transport belt:
0: Default
1: NVRAM update succeeded,
charge can be adjusted.
ON 0 Japan Only
Determines whether ink collection
tank count in NVRAM is corrected
or not.
0: Count not corrected
1: Count corrected.
1 0 Determines how the USB signal is
fixed.
Details