Ricoh Toscana-P1 J007 Service Manual page 19

1. Installation
• On a sturdy, level surface.
• Where it will not become damp.
2. Make sure the machine is never exposed to:
1
• Extreme changes from low to high temperature or high to low temperature.
• Cold or cool air directly from an air conditioner.
• Heat from a space heater.
3. Never install the machine in areas near:
• Dust, lint, or corrosive fumes.
• Strong vibration.
4. Do not use the machine at any location higher than 2,000 m (6,500 ft) above sea level.
5. Set up and use the machine on a sturdy, level surface.
• Place a carpenter's level on the machine front-to-back, and side-to-side and confirm that it is
level.
• variations between the front/back and left/right level readings should be less than 2 degrees.
Required Software Environment
Software Windows 98, Window Me, Windows 2000, Windows XP, Windows 2003, Window NT
4.0 or later
Hardware 80-100 MB of HDD space available
Limitations
These limitations apply to the use of this printer:
• Ver. 4.0 or later is required for Windows NT.
• Windows NT does not support a USB connection to the printer. Use a network connection.
• The USB connection is supported by Windows 98, Windows Me, Windows 2000, Windows XP,
Windows Server 2000.
• USB connection with Windows 98 and Windows Me is limited to USB 1.1.
18