Ricoh Toscana-P1 J007 Service Manual page 170

4. Print the print head gap adjustment chart (Std. (Speed Priority). Std. (Quality Priority)).
5. Adjust the gap (Std. (Quality Priority, Std. (Speed Priority)).
6. Print the print head gap adjustment chart (Std. (Speed Priority). Std. (Quality Priority)).
7. Print the print head gap adjustment chart (High Quality).
8. Adjust the gap (High Quality).
9. Print the print head gap adjustment chart (High Quality).
10. Print the Nozzle Check test pattern.
5200 PRINT SMC
Use this SP to print an engine maintenance summary. You need at least 8 sheets of paper to do
this print. It will take at least 3 minutes before the print will start.
5300 DUMMY NUMBER
Use this SP to set the dummy number. Operation Panel Flow
Input Check: Sensors 1/2
5400 INPUT CHK1
Use this SP to display the on/off status of each sensor. The status of each sensor (O, X) is
displayed on the 2nd line of the display.
No. Meaning
1 Ink Cartridge Set Switches
2 Maintenance HP Sensor
3 Ink Collection Tank Sensor
4 Carriage Position Sensor
5 Not Used
6 Paper End Sensor – Tray 2
Print an Engine Maintenance Summary
Set a Dummy Number
Check Input Sensors (1)
No.
9 PFU Set Sensor
10 PFU Relay Sensor
11 Duplexer Cover Sensor
12 Duplexer Set Sensor
13 Trailing Edge Sensor
14 Registration Sensor 1
SP Tables
Meaning
5
169