Ricoh B230 Service Manual page 1171

Hide thumbs Also See for B230:

Table of Contents

2.2.4 STAPLER UNIT MOVEMENT

The stapler unit [A] is driven by the stapler unit movement motor [B]. The stapler unit HP

sensor [C] detects when the stapler is at home position. The stapler unit stays at its home

position in stand-by mode.

This finisher has three types of stapling. The stapler unit moves as shown: one staple at

the rear corner [D], one staple at the front corner [E] and two staples [F].

Detailed Section Descriptions

Chapters

Table of Contents