Default Settings And Technical Specifications - NETGEAR ProSafe FVS318N User Manual

Default Settings and Technical Specifications

You can use the reset button located on the front of your device to reset all settings to their factory
defaults. This is called a hard reset.
• To perform a hard reset, push and hold the reset button for approximately 5 seconds (until the
TEST LED blinks rapidly). Your device will return to the factory configuration settings shown
in Table A-1 below.
• Pressing the reset button for a shorter period of time will simply cause your device to reboot.
Table A-1. VPN firewall Default Configuration Settings
Feature
Router Login
User Login URL
User Name (case sensitive)
Login Password (case sensitive)
Internet Connection
WAN MAC Address
WAN MTU Size
Port Speed
Local Network (LAN)
LAN IP
Subnet Mask
RIP Direction
RIP Version
RIP Authentication
DHCP Server
DHCP Starting IP Address
DHCP Ending IP Address
DMZ
Default Settings and Technical Specifications
Default Behavior
http://192.168.1.1
admin
password
Use Default address
1500
AutoSense
192.168.1.1
255.255.255.0
None
Disabled
Disabled
Enabled
192.168.1.2
192.168.1.100
Disabled
v1.0
Appendix A
A-1