Mitsubishi 00JCPU User Manual page 527

(2) Availability of new functions depending on the versions of the CPU module
and GX Developer
TableAPPX.3 Availability of new functions depending on the versions of the CPU module and GX Developer
Function block ( GX Developer Version 8 Operating Manual (Function
Block))
Structured text (ST) language (
(Structured Text))
MELSAP3 ( MELSEC-Q/L/QnA Programming Manual (SFC))
*1
PID operation ( MELSEC-Q/L/QnA Programming Manual (PID Control
Instructions))
*1
Real number operation (
Interrupt from intelligent function module (
Initial device value automatic setting (
Remote password setting (
E-mail parameter ( Manual for the module that has the E-mail function)
Online change with a pointer (
*2
Extension of file register R (
Use in multiple CPU systems (
*2
System))
Online change (multiple blocks) (
Use of CC-Link remote net additional mode (
Local Module User's Manual)
Communication with CC-Link IE Controller Network (
Controller Network Reference Manual)
*1: When the CPU module instructions supported by GX Developer Version 8 are read by GX Developer Version 7 or earlier, they are
processed as "instruction code error" by the GX Developer.
*2: The Q00JCPU does not support this function.
Function
MELSEC-Q/L Programming Manual
Section 9.12.3)
Section 6.23)
Section 6.26)
Section 6.19.2)
Section 6.15.2)
Section 9.7)
QCPU User's Manual (Multiple CPU
Section 6.15.2)
CC-Link System Master/
CC-Link IE
Function First 5 digits of
version serial No.
"04121"
A
or earlier
"04122"
or later
B
"06112"
or later
- -
-: Not related to function version, serial No., or GX Developer
APPENDICES
1
2
GX Developer
3
A
Version 8.00A or
later
6
7
8
-
Version 8.00A or
later
Version 8.03D or
later
Version 8.68W or
later
APPX - 6