Mitsubishi 00JCPU User Manual page 530

TableAPPX.6 Availability of new functions depending on the versions of the CPU module and GX Developer (continued)
Online change (files) of SFC program (
File size unit ( Section 5.4.4)
Use of CC-Link remote net additional mode (
Local Module User's Manual))
Incomplete differentiation PID operation (
Programming Manual (PID Control Instructions))
High-speed processing of floating-point data comparison instructions
Reading of the SFC active step comment (
Programming Manual (SFC))
Detection of errors in the redundant power supply system (
6.20)
Clock data in units of 1/1000 seconds
( Section 6.5)
Storage of sampling trace files in the standard RAM
( Section 6.14)
Individual settings of refresh devices in multiple CPU systems (
User's Manual (Multiple CPU System))
Selection of execution of the fall instruction during online change (
Section 6.12.3)
"Block data assurance per station" setting for CC-Link (
System Master/Local Module User's Manual)
CC-Link parameter setting of up to 8 modules (
Master/Local Module User's Manual)
Communication with CC-Link IE Controller Network (
Controller Network Reference Manual)
Change of ATA card (
Maintenance and Inspection))
Support of 4M-byte SRAM card (
Design, Maintenance and Inspection))
APPX - 9
Function
Section 6.12.2)
CC-Link System Master/
MELSEC-Q/L/QnA
MELSEC-Q/L/QnA
CC-Link System
QCPU User's Manual (Hardware Design,
QCPU User's Manual (Hardware
Function
version
Section
B
QCPU
CC-Link
CC-Link IE
First 5 digits of
GX Developer
serial No.
"04122" Version 8
or later or later
Version 8.03D
"05032"
or later
or later
-
"07012"
-
or later
Version 8.23Z
or later
-
"07032"
or later
Version 8.23Z
or later
"07092" Version 8.27D
or later or later
"08032" Version 8.32J
or later or later
"09012" Version 8.45X
or later or later
"16021"
-
or later
-: Not related to GX Developer