Mitsubishi 00JCPU User Manual page 352

(9) Serial
Note8.1
The transmission speed, sum check, transmission wait time, and RUN write setting for using the serial
communication function of the CPU module are set.
Parameter
Item
Use serial
communication
Transmission speed
Sum check
100E
Transmission wait time
RUN write setting
Note1
Note8.1
Basic
The Q00JCPU does not support the serial communication function.
8 - 11
Note1
Table8.9 Serial setting list
Description
No.
Select the item when using the
serial communication function.
Set a transmission speed for data
communication with the external
device.
Set whether to add a sum check
code to a message sent or
received when using the serial
communication function,
according to the specifications of
H
the external device.
Set a period of waiting time on the
Basic model QCPU side in case
the CPU module cannot receive
data immediately after the
external device sends data.
Enable or disable writing of data
from the external device to the
running CPU module.
Figure 8.9 Serial
Setting range
Selected/deselected
9.6kbps, 19.2kbps, 38.4kbps,
57.6kbps, 115.2kbps
Selected/deselected
No waiting time/10ms to
150ms (in increments of
10ms)
Selected/deselected
Default Reference
Deselected
19.2kbps
Selected
Section 6.24
No waiting time
Deselected