Mitsubishi 00JCPU User Manual page 369

(2) Tracking settings
Parameters required for the tracking function in a redundant system are set.
Parameter
Item
Tracking device settings
Signal flow memory tracking
setting
Device detail settings
Tracking block No.
Do auto forward Tracking
block No.1
(Auto ON SM1520)
Device range settings
File register file settings
Tracking characteristics setting
Figure 8.25 Tracking settings
Table8.26 Tracking setting list
Description
No.
Select whether to set the range for
tracking device data to be
transferred.
Select whether to track the signal
flow memory.
Set details when the tracking
device to be transferred is set by
user.
Select the block number of the
tracking device to be transferred.
Then, set details in the Device
D003
H
range settings.
Select whether to automatically
transfer the device data set to the
tracking block No. 1.
Set the device to be tracked and
its range.
When the file register is set in the
Device range settings, select the
memory where the target file
register is stored and enter the file
name.
Select the operation mode of
D002
H
tracking.
Setting range
Internal device block setting/ Internal device block
Device detail settings setting
No tracking/Do tracking No tracking
-
1 to 64 1
Selected/deselected Deselected
Refer to the QnPRHCPU User's
Manual
Synchronized tracking mode/ Synchronized
Program priority mode tracking mode
CHAPTER8 PARAMETERS
Default Reference
-
QnPRHCPU
User's
Manual
(Redundant
System)
-
-
8 - 28
1
2
3
4
5
6
7
8