Mitsubishi 00JCPU User Manual page 366

(12)Multiple CPU settings
Parameters required for configuring a multiple CPU system are set.
Parameter
Item
No.
Set the number of CPU modules used in a multiple
No. of PLC 0E00
H
CPU system.
Set a CPU number for which the multiple CPU
Host CPU
E00C setting parameters are set. (Set the number of the
H
number
connected CPU module.)
Select the multiple CPU system operation to be
performed in case a stop error occurs in any of
Operating
0E01 CPU No.2 to No.4.
H
mode
When CPU No.1 results in a stop error, the multiple
CPU system stops. (Fixed)
Multiple CPU
Enable or disable synchronous startup of the CPU
synchronous E00B
H
modules on the multiple CPU system.
startup setting
Enable or disable the online module change in the
Online module multiple CPU system. (When enabled, the CPU
E006
H
change module cannot read the I/O data outside the
specified group.)
Note3
Note8.3
Redundant
The Redundant CPU cannot be used in multiple CPU systems.
8 - 25
Note3
Note8.3
Figure 8.23 Multiple CPU settings
Table8.23 Multiple CPU setting list
Description Setting range
1 to 4 1
PLC No.1 to No.4 Blank
Selected/deselected All items selected
Mp.1 to No.4 All items selected
• High Performance
model QCPU:
Selected/deselected Deselected
• Process CPU:
Selected
Default Reference
QCPU User's
Manual (Multiple
CPU System)
(To the next page)