Mitsubishi 00JCPU User Manual page 41

(4) Module can be changed online. (Online module change)
When a module fails, it can be changed without the system being stopped.
For details of the online module change, refer to the following.
QCPU User's Manual (Hardware Design, Maintenance and Inspection)
Manual for the module supporting the online module change
(5) Configuration of MELSECNET/H multiplexed remote I/O system
Installing a remote master station in the MELSECNET/H network system can configure the MELSECNET/H mul-
tiplexed remote I/O system.
(6) Support of software package dedicated to process control (PX Developer)
Process control software package (PX Developer) easily creates PID control programs with function blocks.
The combination of the Process CPU and the process control software package (PX Developer) offers excellent
engineering environment.
●
For the Q12PHCPU and Q25PHCPU, use GX Developer Version 7.10L or later.
For the Q02PHCPU and Q06PHCPU, use GX Developer Version 8.68W or later.
●
Use PX Developer together with GX Developer Version 7.12N or later.
For the Q12PHCPU or Q25PHCPU, use PX Developer Version 1.00A or later.
For the Q02PHCPU or Q06PHCPU, use PX Developer Version 1.18U or later.
For details of PX Developer, refer to the manual for PX Developer.
●
The CPU module functions are added at the update of serial number of CPU module or GX Developer version.
For functions added by the update of the Process CPU, refer to Appendix 2.3.
CHAPTER1 OVERVIEW
1 - 16
1