Mitsubishi 00JCPU User Manual page 137

(b) Checking the memory capacity after formatting
Select [Online] [Read from PLC] in GX Developer.
1) Select "Standard RAM" in "Target memory" on the Read from PLC screen.
2) Click the
Free space volume
3) The memory capacity appears in "Total free space volume".
(3) Writing to the standard RAM
Select [Online] [Write to PLC] in GX Developer.
Select "Standard RAM" in "Target memory" on the Write to PLC screen.
The file size has its minimum unit. (
The occupied memory capacity may be greater than the actual file size.
Note that as the number of files increases, the difference between the occupied memory capacity and the actual file size
increases.
button.
1) Select the target memory.
2) Click the
Free space volume button.
Figure 5.7 Procedure for checking the memory capacity
Figure 5.8 Write to PLC screen
Section 5.4.4)
CHAPTER5 MEMORIES AND FILES USED FOR CPU MODULE
3) The memory capacity
value is shown.
1
2
3
4
5
6
7
8
5 - 8