Mitsubishi 00JCPU User Manual page 264

(f) Displaying trace results
Read trace results form the CPU module and display the data.
1) Click the
2) Click the
The trace results shows the on/off status of each bit device for every sampling cycle and the current value of
each word device.
Specified devices are read when the condition selected in "Trigger point setup" (trigger condition) is established.
Therefore, when devices are sampled in every scan and the sampling is finished by trigger operation from a peripheral, the
data is sampled twice because timing of the sampling is the same with that of the establishment of trigger condition.
6 - 84
Trace result PLC read
button on the same screen to display the trace results read.
Trace result
Figure 6.64 Trace result screen
Data when the trigger
conditions are satisfied.
button on the screen shown in Figure 6.63 to read trace results.
Data when trigger condition is met
Figure 6.65 Trace result