Mitsubishi 00JCPU User Manual page 501

(3) Execution of multiple programs
When multiple programs are executed, the processing time shown in Table10.20 is required for each program.
Table10.20 Processing time for each program (when multiple programs are executed)
CPU module
Q02CPU
Q02HCPU, Q06HCPU, Q12HCPU, Q25HCPU
Q02PHCPU, Q06PHCPU, Q12PHCPU, Q25PHCPU
Q12PRHCPU, Q25PRHCPU
*1: "n" indicates the number of program files.
(4) Removal and insertion of a memory card
When a memory card is removed or inserted, the processing time shown in Table10.21 is required only for one
scan where a memory card is removed or inserted.
Table10.21 Processing time (when a memory card is removed or inserted)
CPU module
Q02CPU
Q02HCPU, Q06HCPU, Q12HCPU, Q25HCPU
Q02PHCPU, Q06PHCPU, Q12PHCPU, Q25PHCPU
Q12PRHCPU, Q25PRHCPU
(5) Use of the file register
When "Use the same file name as the program." is selected in the PLC file tab of the PLC parameter dialog box,
the processing time shown in Table10.22 is required.
When "Use the following file." is selected, the scan time will not be increased.
CPU module
Q02CPU
Q02HCPU, Q06HCPU, Q12HCPU, Q25HCPU
Q02PHCPU, Q06PHCPU, Q12PHCPU, Q25PHCPU
Q12PRHCPU, Q25PRHCPU
*1: "n" indicates the number of program files.
Table10.22 Processing time (when the file register is used)
CHAPTER10 CPU MODULE PROCESSING TIME
Processing time
0.08 n ms
0.03 n ms
Processing time
When a memory card is
inserted
0.16ms
0.08ms
Processing time
Standard RAM
1.03ms
0.41ms
*1
*1
When a memory card is
removed
0.10ms
0.04ms
Memory card
*1
1.14 n ms
*1
0.50 n ms
10 - 17
1
10
3
4
5
6
7
8