Mitsubishi 00JCPU User Manual page 477

(3) Local device setting
(a) Setting the local device range
In the Device tab of the PLC parameter dialog box, set the range that is used as a local device.
Note that the local device range is common to all programs, and cannot be changed for each program.
For example, if a local device range is specified as M0 to M100, this range setting applies to all programs that
use the local device.
Program A
M0
Local
device
M100
Figure 9.100 Device
Program B Program C
Local Local
device device
Figure 9.101 Local device range
CHAPTER9 DEVICES
Local device range is
common to all programs.
9 - 102
9