Table of Contents
Advertisement
Error Messages and Error Codes
Error Messages (in Alphabetical Order)
The following table lists the error messages that appear on the control panel.
Note
• If the message text cannot fit on a single screen, use the <
Message
Add paper to Bypass
<size and orientation> <type>
Add paper to Tray N
<size and orientation> <type>
(N: Whichever from 1 to 4)
Automatically select
available paper type
Press OK to print
Or, use Delete Job
Can print in Black
Replace Toner: X
Or, use Delete Job
(X: C, M, or Y)
Check or adjust
Tray N Paper Guides
(N: Whichever from 1 to 4)
Check Bypass
<size and orientation> <type>
• The paper size or
orientation loaded
is different from
the selected size.
Reload paper.
• Paper type loaded
is different from
the selected type.
Reload paper.
Check Bypass
<size and orientation> <type>
• Return to the
previous screen,
check if Tray 5
(Bypass) has been
loaded with the
indicated size.
Then press OK.
62
5 Troubleshooting
> and <
The bypass tray is out of paper.
Load paper of the size, orientation, and type indicated by the message, into the
bypass tray.
Refer to
• "Loading Paper in the Bypass Tray" (P. 44)
Paper tray N is out of paper.
Load paper of the size, orientation, and type indicated by the message, into paper
tray N.
Refer to
• "Loading paper into Trays 1 through 4" (P. 46)
The type of paper specified in the print driver is not loaded in the paper tray. Press
the <OK> button on the control panel to print on a different type of paper, or press the
<Delete Job> button to cancel printing.
Only monochrome printing can be performed.
To perform color printing, replace the displayed X toner cartridge with a new one.
Note
• Pressing the <Information> button will display detailed information on the control
panel.
Paper tray N is pulled out.
After confirming that paper is loaded, push tray N into the printer.
The correct type of paper is not loaded in the bypass tray.
Load paper of the size, orientation, and type indicated by the message, into the
bypass tray.
Note
• Pressing the <Information> button will display detailed information on the control
panel.
Refer to
• "Loading Paper in the Bypass Tray" (P. 44)
The correct type of paper is not loaded in the bypass tray.
Load the type of paper indicated by the message into the bypass tray and then press
the <OK> button.
Note
• Pressing the <Information> button will display detailed information on the control
panel.
> buttons to change screens.
Symptom/Cause/Remedy
Advertisement
Table of Contents
