Right Covers - Ricoh B132 Service Manual

3.2.5 RIGHT COVERS

Remove:
• Disconnect and separate the LCT if it is installed.
[A]: Knockout ( x2). This has been removed already if the LCT has been
installed.
[B]: Open the bypass tray.
[C]: Right upper cover ( x2). Pull the bottom of the cover down and toward you
as you remove it.
[D]: Right lower cover ( x5). Pull the bottom of the cover down and toward you as
you remove it.
Reinstallation
• Make sure all the cover tabs are inserted correctly before you fasten the screws.
SM
COMMON REMOVAL PROCEDURES
[C]
B132R704.WMF
3-9
[B]
[A]
[D]
B132/B200