Ricoh B132 Service Manual page 462

SERVICE CALL CONDITIONS
SC765 B
SC766 B
SC767 B
SC770 B Cover interposer tray bottom plate motor error
• After the motor starts to raise
• After the motor starts to lower
SC775 D Cover interposer tray feed motor
Z-Fold feed motor error Japan Only
SC780 B
The feed motor does not attain
the prescribed speed within the
specified time.
B132/B200
Folding unit bottom fence lift motor
The 1st detection failure issues a jam
error, and the 2nd failure issues this SC
code.
Clamp roller retraction motor error
The 1st detection failure issues a jam
error, and the 2nd failure issues this
SC code.
Stack junction gate motor error
Occurs during operation of the punch
unit. The 1st detection failure issues a
jam error, and the 2nd failure issues
this SC code.
the bottom plate, the bottom
plate position sensor does not
detect the plate at the
specified time (3 s).
the bottom plate, the bottom
plate HP sensor does not
detect the bottom plate.
• Motor harness disconnected,
loose, defective
• Motor defective
• Motor harness disconnected,
loose, defective
• Motor defective
• Motor harness disconnected,
loose, defective
• Motor overload
• Motor defective
• Bottom plate position sensor,
disconnected, defective
• Bottom plate HP sensor disconnected,
defective
• Motor harness disconnected, loose,
defective
• Motor overload
• Motor defective
• Feed motor disconnected, defective
• Feed motor overloaded due to
obstruction
• Feed motor lock
4-62 SM