Ricoh B132 Service Manual page 316

DUPLEX UNIT
[F]
[C]
[A]: Jogger fences ( x 1 ea.)
[B]: Left transport cover ( x 2)
• The front screw is a shoulder screw. Insert the screws in the correct holes
when re-attaching.
• To avoid breaking the tabs under the left edge of the table, pull the table to
the right to disengage the tabs and then remove.
[C]: Transport sensor 1 (x 1,  x 1)
[D]: Transport sensor 2 (x 1,  x 1)
[E]: Inverter exit sensor ( x 1,  x 1,  x 1)
Reinstallation
• Make sure the end tabs [F] of the left transport cover are engaged correctly.
B132/B200
[D]
[E]
3-106
[A]
[B]
[F]
B132R507.WMF
SM