Ricoh B132 Service Manual page 608

SERVICE PROGRAM TABLES
5907 Plug & Play Maker/Model Name
Selects the brand name and the production name for Windows Plug & Play. This
information is stored in the NVRAM. If the NVRAM is defective, these names
should be registered again.
After selecting, press the "Original Type" key and "#" key at the same time. When
the setting is completed, the beeper sounds five times.
5913 Switchover Permission Time
002 Print Application Timer
Sets the length of time to elapse before allowing another application to take
control of the display when the application currently controlling the display is not
operating because a key has not been pressed.
[3~30/1 s]
102 Print Application Set
No information is available at this time.
[0~1/1/1]
5959 Set Size
Tray 1 (tandem tray) and the LCT do not have automatic paper size detection. Use
these SP codes to set the paper size for Tray 1 and the optional LCT.
001 Tray 1:Tandem
The following paper sizes can be set. If the A3 DLT kit is not installed, you can only
use settings 0 and 1
0 A4
1 8.5 x 11
2 A3 SEF
3 B4 SEF
4 A4 SEF
5 11 x 17
005 LCT
The LCT accepts three paper sizes. Enter the correct number of the size of the
paper loaded in the LCT:
0 A4
1 8.5 x 11
2 B5
3 A4 SEF
B132/B200
Set Size
6 8.5 x 14 SEF
7 8.5 x 11 SEF
8 B5
9 B5 SEF
10 Custom
4 8.5 x 11 SEF
5 B4 SEF
6 8.5 x 14 SEF
7 Custom Size
5-130 SM