Sc Codes Group 5: Paper Feed - Ricoh B132 Service Manual

SERVICE CALL CONDITIONS

SC codes Group 5: Paper Feed

SC501 B Tray 1 (tandem tray) feed error (Japan Only)
• The tray 1 lift sensor does not
• When the tray lowers, the tray
•
Tray 2 (paper cassette) feed error (Japan Only)
SC502 B
• The lift sensor is not activated
within 10 seconds after the
tray lift motor starts lifting the
bottom plate.
• When the tray lowers, the tray
lift sensor does not go off
within 1.5 sec.
• The lower limit sensor of the
tandem tray does not detect
the lower limit within 10 sec.
SC503 B Tray 1 feed error
• The lift sensor is not activated
• When the tray lowers, the tray
SC504 B Tray 2 feed error
• The lift sensor is not activated
• When the tray lowers, the tray
B132/B200
switch on 10 s after the tray
lift motor switches on and
starts lifting the bottom plate.
lift sensor does not go off
within 1.5 sec.
The lower limit sensor of the
tandem tray does not detect
the lower limit within 10 sec.
within 10 seconds after the
tray lift motor starts lifting the
bottom plate.
lift sensor does not go off
within 1.5 sec.
within 10 seconds after the
tray lift motor starts lifting the
bottom plate.
lift sensor does not go off
within 1.5 sec.
• Tray lift motor harness disconnected,
loose, defective
• Paper or other obstacle trapped between
tray and motor
• Tray lift sensor disconnected, damaged
• Lower limit sensor disconnected,
damaged
• Pick-up solenoid disconnected, blocked
by an obstacle
• Tray lift motor defective or disconnected
• Paper or other obstacle trapped between
tray and motor
• Pick-up solenoid disconnected or
blocked by an obstacle
• Tray lift motor defective or disconnected
• Paper or other obstacle trapped between
tray and motor
• Pick-up solenoid disconnected or
blocked by an obstacle
• Tray lift motor defective or disconnected
• Paper or other obstacle trapped between
tray and motor
• Pick-up solenoid disconnected or
blocked by an obstacle
4-46 SM