Ricoh B132 Service Manual page 461

SC753 B Return roller motor error
Occurs during the operation of the lower tray
pressure motor.
SC760 D Finisher punch motor error
The punch HP sensor is not
activated within the specified
time after the punch motor
turned on. The 1st detection
failure issues a jam error, and
the 2nd failure issues this SC
code.
SC761 B Finisher folder plate motor error
The folder plate moves but is not
detected at the home position
within the specified time. The 1st
detection failure issues a jam
error, and the 2nd failure issues
this SC code.
SC762 B Finisher pressure plate motor error
Pressure plate motor operating
but the plate is not detected at
the home position within the
specified time. The 1st detection
failure issues a jam error, and
the 2nd failure issues this SC
code.
SC763 D
SC764 D
SM
Punch movement motor error
Occurs during operation of the punch
unit. The 1st detection failure issues a
jam error, and the 2nd failure issues
this SC code.
Paper position sensor slide motor error
Occurs during operation of the punch
unit. The 1st detection failure issues a
jam error, and the 2nd failure issues
this SC code.
SERVICE CALL CONDITIONS
• Motor harness disconnected,
loose, defective
• Motor overloaded
• Home position sensor
harness disconnected, loose,
defective
• Home position defective
• Punch HP sensor disconnected,
defective
• Punch motor disconnected, defective
• Punch motor overload due to obstruction
• Folder plate HP sensor disconnected,
defective
• Folder plate motor disconnected,
defective
• Folder plate motor overloaded due to
obstruction.
• Pressure plate HP sensor disconnected,
defective
• Pressure plate motor disconnected,
defective
• Pressure plate motor overloaded due to
obstruction
• Motor harness disconnected,
loose, defective
• Motor defective
• Motor harness disconnected,
loose, defective
• Motor defective
4-61 B132/B200