Lct Adapter (B699) Installation - Ricoh B132 Service Manual

LCT Adapter (B699) Installation

The LCT Adapter Kit B699 must be installed before you install the LCT.
1. Put the LCT [A] on its front side.
Important! Do not put the LCT on its right side (the open side), or you will
bend the ground plate [B].
2. Remove the 3 casters [C] ( x 3 each).
3. Attach the 3 supports [D] ( x 1 each – M3x8 thin screws).
4. Set the LCT in a vertical position.
5. Remove the stay [E] ( x 4).
6. Attach the stay at [F] ( x 4).
SM
[A]
[B]
[C]
[D]
[E]
1-55
LCT (B473), LCT ADAPTER (B699)
[F]
B699I103.WMF
B132/B200