Ricoh B132 Service Manual page 137

[A]
5. Install the table extension [A] ( x 2) (M4 x 8).
6. Make sure that the edge of the table extension is aligned with the edge of the
finisher [B].
7. If you will not install the Cover Interposer B704:
• Remove the strip from the sponge cushion [C], and attach it to the finisher.
• Attach the entrance guide plate [D] ( x 2) (M3 x 6).
If you are going to install the Cover Interposer B704:
• Do not attach the sponge cushion.
• Do not attach the entrance guide plate [D] to the finisher.
•
Install the interposer before you dock the finisher to the copier. Then come
back to the procedure for the B706 finisher, and continue from 'Selecting
the Staple Supply Name'.
SM
3000-SHEET FINISHER (B706), FINISHER ADAPTER (B698)
[B]
[C]
B706I005.WMF
[D]
1-91
B706I207.WMF
B132/B200