Ricoh B132 Service Manual page 605

010 Copy HDD to SD Card Latest 4 MB Any Key)
Takes the log of the specified key from the log on the hard disk and copies it to the
SD Card.
A unique file name is generated to avoid overwriting existing file names on the SD
Card. Up to 4 MB can be copied to an SD Card. 4 MB segments can be copied one
by one to each SD Card. This SP does not execute if there is no log on the HDD with
no key specified.
011 Erase HDD Debug Data
Erases all debug logs on the HDD
012 Erase SD Card Debug Data
Erases all debug logs on the SD Card. If the card contains only debugging files
generated by an event specified by SP5858, the files are erased when SP5857 010
or 011 is executed.
To enable this SP, the machine must be cycled off and on.
013 Free Space on SD Card
Displays the amount of space available on the SD card.
014 Copy SD to SD (Latest 4MB)
Copies the last 4MB of the log (written directly to the card from shared memory) onto
an SD card.
015 Copy SD to SD (Latest 4MB Any Key)
This SP copies the log on an SD card (the file that contains the information written
directly from shared memory) to a log specified by key number. (!5.10)
016 Make HDD Debug
This SP creates a 32 MB file to store a log on the HDD.
017 Make SD Debug
This SP creates a 4 MB file to store a log on an SD card.
5858 Debug Save When
These SPs select the content of the debugging information to be saved to the
destination selected by SP5857 002.
SP5858 3 stores one SC specified by number. Refer to Section 4 for a list of
SC error codes.
001 Engine SC Error
(0:OFF 1:ON)
002 Controller SC Error
(0:OFF 1:ON)
003 Any SC Error
004 Jam (0:OFF 1:ON)
SM
SERVICE PROGRAM TABLES
Stores SC codes generated by copier engine
errors.
[0~1/1]
0: OFF
1: ON
Stores SC codes generated by GW controller
errors.
[0~1/1]
0: OFF
1: ON
[0~65535/1]
Stores jam errors.
[0~1/1]
0: OFF
1: ON
5-127 B132/B200