Selecting The Staple Supply Name; Enabling Booklet Binding (B700 Only) - Ricoh B132 Service Manual

Selecting the Staple Supply Name

Go into the SP mode and input this information.
5841 Supply Name Setting
013 Staple Std3
022 Staple Bind2

Enabling Booklet Binding (B700 Only)

To enable booklet binding (saddle-stitching) for the B700, you must select the
center stapling position.
1. Push the User Tools key.
2. Touch "Copier/Document Server Features".
3. Touch the "Input/Output" tab.
4. Touch a "Stapling Position" button and touch the center (saddle-stitch) stapling
symbol.
5. Go out from the User Tools mode. Set the number of copies, touch the center
stapling symbol on the operation panel, then start the print job.
SM
2000/3000 SHEET FINISHERS (B700/B701)
These names show when the user prints the Inquiry List
Push the Counter key, then push 'Print Inquiry List'.
Push the Inquiry button on the initial User Tools screen.
Input the name of the staples that are used for standard
stapling (not booklet stapling). This setting should be
done for the B700 and B701.
Input the name of the staples that are used for booklet
stapling (saddle-stitching). This setting is necessary only
for the B700.
1-73 B132/B200