Special Procedures; Sp2181 030 (Alignment Result) Errors - Ricoh B132 Service Manual

SPECIAL PROCEDURES

4.2 SPECIAL PROCEDURES

4.2.1 SP2181 030 (ALIGNMENT RESULT) ERRORS

After SP2181 030 executes normally, you should see:
1
If you see any number other than a "1", this indicates an error.
Code Error
0 None
1 None
2 Failure
12 Abnormal detection pattern
B132/B200
Problem
Large amount of skew.
Large amount of K skew.
Large amount of skew in every color.
Density too light.
ITB scratched.
ITB misaligned.
SP2153 023 set to 1 (OFF).
Image density too light.
Dirty, abnormal images.
Default display.
No action required.
Print a trim pattern with SP2109 002 Pattern 10.
Print a coverage pattern with SP2109 002 Pattern 1.
Check the images.
Replace the ITB.
Reinstall ITB.
Set SP2153 023 to 0 (ON).
Output a coverage pattern with SP2109 002 Pattern
1. Check the images.
Output Pattern 1, 18, or 20 with SP2109 002 and
check the images.
4-6
Recovery
SM