Installation Procedure - Ricoh B132 Service Manual

Installation Procedure

1. Remove the I/F cover slot [A] of Slot D ( x2).
2. Touch a metal surface to remove static charge from your hands before you
touch the interface card.
3. Put the interface board [B] in Slot D.
4. Check that the board is fully in the slot, then attach it ( x2).
5. Put the Bluetooth card [C] in the slot of the interface board.
6. Push the antenna cap [D] to extend it.
7. Attach the card cover [E] (used to prevent static electricity).
8. Turn the machine off and on. Then do SP5990 to print an SMC Report to check
that the interface board is installed correctly.
SM
[C]
[B]
1-131
MFP CONTROLLER OPTIONS
[A]
[E]
[D]
B737I104.WMF
B132/B200