Attaching The Corner Plates For The B706 - Ricoh B132 Service Manual

COVER INTERPOSER TRAY (B704)

Attaching the Corner Plates for the B706

Important:
• The corner plates are installed on the B706 only.
Right Rear Corner Plate (B706 only)
NG
[A]
1. Temporarily attach the screws [A] (with approximately two turns) to the right
end of the finisher extension table [B] ( x 2, tapping M4 x 8)
NOTE: You cannot see the holes, because they have tape on them. You can
punch the screws through the tape.
2. Align the notches [C] in the right rear corner plate [D] with the screws and
attach the plate.
3. Put a long screwdriver through the notches in the right rear corner plate [D].
Then, tighten the screws to attach the right rear corner plate to the table
extension [B].
B132/B200
OK
[B]
1-110
[C]
[D]
B704I112.WMF
SM