Ricoh B132 Service Manual page 769

An STC must be set with its color ID label [A] facing out.
If an STC is inserted with its label facing into the machine, this will cause a "Toner
Cartridge Setting Error".
Important
• At elevations 1,000 meters (3,280 ft.) above sea level, the toner cartridge packs
may expand due to the difference in air pressure, preventing them from being
installed in their bins.
• After approximately 24 hours, the cartridges should shrink to normal size.
• If the customer cannot wait for the STCs to collapse naturally, the STC Air
Release Kit is available as a service part. For more, contact your technical
supervisor.
SM
B132I108A.WMF
6-67
TONER SUPPLY
[A]
B132/B200