Ricoh B132 Service Manual page 611

6020 ADF Skew Adj
This SP switches on stopping the scanning entrance roller for all paper sizes.
Normally, the scanning entrance roller stops briefly to correct skew of small paper
sizes in the ADF paper path and for the 2nd side scanning of originals during
duplexing. Setting this SP to "1" sets the ADF to stop the scanning entrance roller for
all paper sizes to correct for skew a second time.
[0~1/1]
6050 Adj Staple Pos
Adjusts the position of the staples during corner stapling.
6090 LCT Output Chk
Performs the output check for the optional LCT.
001 LCT Feed Motor
002 LCT Pickup SOL
6101 Adj Punch Pos 1
Adjusts the punch hole positions in the direction of paper feed.
NA: North America
DOM: Japan
EU: Europe
SCAN: Scandinavia
001 2-Hole:DOM
002 3-Hole:NA
003 4-Hole:EU
004 4-Hole:SCAN
005 2-Hole:NA
SM
ARDF Skew Adjustment at the Scanning Entrance Roller
Staple Position Adjustment
LCT Output Check
Punch Position Adjustment
[-75~+75/0.5 mm]
+ Value: Shifts punch unit in the direction of feed.
- Value: Shift punch unit against direction of feed.
Paper Feed
5-133
SERVICE PROGRAM TABLES
B132S921.WMF
B132/B200