Ricoh B132 Service Manual page 663

Rev. 10/2005
8 951 AddBook Register
These SPs count the number of events when the machine manages data
registration.
8 951 1 User Code
8 951 2 Mail Address
8 951 3 Fax Destination
8 951 4 Group
8 951 5 Transfer Request Fax relay destination
8 951 6 F-Code
8 951 7 Copy Program
8 951 8 Fax Program
8 951 9 Printer Program
8 951 10 Scanner
Program
⇒
9 405 System Stop Ctrl Setting
Setting of the system stop control function.
001 System Stop
Control ON/OFF
002 System Stop
History
SM
SERVICE PROGRAM TABLES
User code registrations.
Mail address registrations.
Fax destination registrations.
Group destination
registrations.
registrations for relay TX.
F-Code box registrations.
Copy application registrations
with the Program (job
settings) feature.
Fax application registrations
with the Program (job
settings) feature.
Printer application
registrations with the
Program (job settings)
feature.
Scanner application
registrations with the
Program (job settings)
feature.
Switches the System Stop Control Function ON or OFF.
When this switch is ON:
The machine stops the job when the output of the
temperature/humidity sensor on the K-PCU is 41 ° C
(105.8 ° F) or higher.
NOTE: This keeps the temperature of the toner in the
development unit below 50 ° C (122 ° F).
[0 - 1/ 1] 0: OFF, 1: ON (default)
Displays whether or not System Stop Control has ever
stopped the machine in the middle of the job.
0 (default): System Stop Control has never stopped the
machine.
1: System Stop Control has stopped the machine one or
more times.
5-185
[0~9999999/ 1]
[0~255 / 255]
B132/B200